Anmol Basic Linen Carrier Review

Processed with VSCO with preset

Anmol is an India-based brand, known for baby carriers that are not only ergonomic in design but which come in varied colours and prints. It’s founded and run by Rashmee; a Mommy entrepreneur. (You see why I wanted to try her carrier and back her up?! Mommy Power!)
I was gifted two lovely carriers by Anmol, one was a standard SSC, and also a linen one. I love both, but seem to reach for the linen more. Before I pen down the reasons why, I’d like to express my gratitude towards the Anmol team for being ever so sweet and patient with me!

Rashmee Gajra – who is a baby-wearing educator herself – puts a lot of effort into the small details of her carriers; especially when it comes to the structural build: courtesy no doubt of background in architecture! They are comfy, robust and lightweight.

Processed with VSCO with c1 preset
Let’s talk materials: linen is by far my favourite fabric and I couldn’t have received it at a better time than on a holiday in India! After six long years in chilly England, Mumbai seemed unbearably hot and sweaty. Linen makes cuddles with hot and sticky babies pleasant due to its high absorbency and cool feel. Furthermore, it is so lightweight that even back home in the English winter, I find myself reaching for it. Toddlers are heavy: if I can knock off a few grams of my back by grabbing a lightweight carrier, why wouldn’t I?!

Processed with VSCO with preset
One other reason why I find myself reaching out for the linen is because of its abrasion resistance. I walk dogs for a living, I have three kids and I homeschool. My carrier is precious to me but it is not necessarily treated very preciously! There have been times when dogs have jumped up and their claws have pulled a thread off my other carriers or kids have used my carriers as a blanket in the park etc. Anmol Linen carrier’s superior durability and sturdiness is what a busy mommy like me need! It has successfully managed to maintain and hold its own, despite the dogs jumping, kids chucking it here and there and general clumsiness one can assume around wild children and dogs.
Structurally speaking, Anmol Linen carrier has a huge body panel, that carries a baby from infancy to 20 kgs. Personally, I wouldn’t have managed to use this carrier from the newborn stage as my baby was smaller at birth it might have been too big. But for bigger newborns this carrier can be easily used with an insert, which is also available on their website or just roll up a towel to make a seat inside the carrier for the baby.

I doubt you would even need to upgrade to toddler carrier if you own one of these. Anmol is a little bit on the bigger side I have noticed compared to some other Indian brands and it can easily be compared to the International leader Tula in terms of the sizing of the body panel. It covers my 22 month old comfortably and the panel still comes all the way up to the back of his neck in a front carry.

The body panel has a sewn in hood which folds up nicely in a built in pouch on the top of the panel. The shoulder straps are not too thick or too thin. It provides for a perfect padding and I, personally have not seen any digging whatsoever. The waistband is also not too wide which is a plus for a petite woman like me. The waistband also expands quite generously, which might be handy for people with a bigger silhouette. The waistband also has a tiny little pouch on its side for keys. I have to admit it is not the most spacious pocket. I cannot even put a standard debit card in there. Just a small key perhaps. But that is the least of my worries!

Anmol Linen Carrier has four basic adjusters. One on the waistband, one on each side of the body panel, one on the back of the shoulder strap and one in the front of the shoulder straps. All of these adjusters help achieve the best personal fit possible. My favourite one has to the Perfect Fit Adjuster (PFA) on the shoulder harness in the front . It is perfect for breastfeeding your baby. Simply loosen up the body panel slightly by adjusting the straps on the side of the panel, then loosen up PFA voila! You are good to go.

Processed with VSCO with c1 preset
The hood is secured in the pouch with velcro which is easily taken out for some privacy whilst breastfeeding or coverage from harsh sunlight or wind or even spitting rain! Trust me, in England we can get all of those things within a matter of an hour, so a hood is an essential part of my baby carriers. The hood has a paracord that secures on to the hook on the shoulder harness pretty easily. It helps the baby’s head from falling back when they are fast asleep especially in a back carry.

Like its standard SSC, Anmol Linen SSC also provides a wide seat with knee padding for extra comfort to the child. It is so ergonomic with its deep seat and knee-to-knee positioning. Since we are talking about ergonomics, let me assure you that your back and shoulders will be thankful just as the brand promises. I walk in the woods and marshes for least 2 hours each day and I wear RoRo for more or less 4 hours on a daily basis.
I have a terrible back problem and my shoulders hurt from a simply activity such as carrying a heaving backpack but the Anmol Carriers never cause me any pain. It has an impeccable quality of distributing the weight of my baby evenly on my waist, back and shoulders. Linen especially feels comfortable and much more breathable.

Another favourite feature of mine is the safety buckle on the waistband. I have not seen many international brands carry this feature either. The buckle basically is secured with an elastic band but also has an extra locking system. In order to release the buckle you have to press an extra button. It is to prevent any accidental unlocking which can – trust me – happen with other slings. So it may take time to unbuckle yourself and you do need two hands to do it, which can be a bit annoying, it is totally worth the effort though.

What Would I change about the carrier?
I am personally very pleased with this product but having said that I wouldn’t mind if the adjuster attached to the sides of the body panel could be tightened by pulling away from the wearers body, rather than pulling back, it would make adjusting easier and we might achieve a tighter fit. The pulling back feature puts a lot of stress on the wrist. This obviously is not an issue when wearing the baby on the back. But in the front carry, the adjuster can become an issue to some.

Processed with VSCO with preset
Final Verdict:
All of Anmol’s products are Fairtrade, made with the highest standards, dyed with child – friendly colours and handwoven. Each piece is unique in itself. It is five out of five for me! It easily compares to the top international leaders like Tula for sizing and comfort or the very ergonomic German brand Manduca for its safety features.

Pricing is also very, very reasonable at around £77 plus shipping; which let’s be honest is less than many top brands sold second hand. Let’s also not forget to mention the one-to-one customer service Rashmee, the founder provides. She is available on Instagram, Facebook, via email or even a telephone call away. She has never disappointed me with her after care. So why not support a brand that is helping a small community of artisans who are handcrafting a product that your baby and you will be spending hours wearing?


Leave a Reply

Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s